Caterpillar DE65E3 Diesel Generator Set
CAT DE65E3 Diesel Generator Sets is a V-4-Cylinders 4.4 Liter (268.5 cu. in) Displacement Engine with 127.0 mm (5.0 in.) Bore and 127.0 mm (5.0 in.) Stroke.
Equipped with Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with Electronic Unit Injector Fuel System Rigid Wiring Harness and ADEM™ A5 Governor.The Prime Power for 50 Hz Generator Set (1500 RPM) of CAT DE65E3 Diesel Generator Sets is 60.0 kVA (48.0 kW) and a Standby Power of 65.0 kVA (52.0 kW).
CAT DE65E3 Diesel Genset Powered by CAT Diesel Engine with EMCP 4 Control Panel, Diesel Genset with Turbocharged & Water-Air Intercooler.
CAT Diesel Generator Sets Meet Tier III/Tier IV Emission Standards. As Part of EMAC, CAT Diesel Generator Sets Also Provide 50 Hz and 60 Hz Diesel Generator Sets. Engine Brands Include Cummins, Deutz, Perkins, MTU, WeiChai and CAT.
Our Diesel Generator Set Series Includes High Power Medium and High Voltage Generator Sets and High Power Low Voltage Generator Sets. The Engine Provides Electronically Controlled and Mechanical Fuel Injection Systems for Customers to Choose. In Addition to Generating Diesel Generator Sets, We Can Also Supply Marine Diesel, Oil, Gas, Marine Generator Sets.
We Provide Full Life Cycle Services for All Customers, From Design to Power System Supply, From Installation to Commissioning, From After-Sales Service Training to Spare Parts Supply, From Troubleshooting to Overhaul Technical Support.
Advantages of Caterpillar DE65E3 Diesel GenSet
-
High power generation efficiency: The power generation efficiency of CAT Caterpillar gas-fired internal combustion generator sets is about 33-41%, and the efficiency of combined heat, power and cooling can reach more than 80%.
-
Low requirements for gas source: The gas internal combustion generator set has low requirements on the intake pressure (medium and low pressure) and intake temperature of the gas source, and has a wide range of calorific value.
-
Wide range of power used: Caterpillar gas internal combustion generator sets have a power range of 80 to 3480KW, which can operate as a single unit or in parallel with multiple units, grid-connected operation, and flexible station construction.
-
Wide range of adaptation to ambient temperature and altitude. At an ambient temperature of 40 degrees Celsius and an altitude of 500 meters, the rated power of the Caterpillar gas-fired internal combustion generator set is not compromised, and it can output 100%.
Technical Specifications
Basic Introduction of CAT DE65E3 Diesel Generator Set
| Genset Model: | DE65E3 |
| Prime Power: | 60 kVA |
| Genset Frequency: | 50 Hz |
| Engine Model: | C4.4 |
| Rated Power: | 1500 r/min @ 48.0 kW |
| Alternator Brand: | N/A |
| Alternator Model: | N/A |
| Genset Dimension: | N/A |
| Wet Weight: | 999 Kg |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
Generrator Model |
Engine Model |
StandbyV |
Prime |
Generator Dimension |
| DE65E3 | CAT C4.4 | 65.0 kVA / 52.0 Kw | 60.0 kVA / 48.0 kW | 1925 kg / 75.8 in * 1120 kg / 44.1 in * 1361 kg / 53.6 in |
| ——END—— | ||||
performance Data of CAT DE65E3 Diesel Generator Set |
|||
| Engine Model | DE65E3 | Generator Set Model – 3 Phase | 400/230 V, 50 Hz |
| Prime | 60.0 kVA / 48.0 kW | Standby | 65.0 kVA / 52.0 kW |
| Length | 1925 kg / 75.8 in | Net Weight (+ Lube Oil) | 986 kg / 2174 Ib |
| Width | 1120 kg / 44.1 in | Wet Weight (+ Lube Oil & Coolant) | 999 kg / 2202 Ib |
| Height | 1361 kg / 53.6 in | Fuel, Lube Oil & Coolant | 1184 kg / 2611 Ib |
Technical Data of CAT DE65E3 Diesel Generator Set |
|||
| Control Panel | R1953L4 | Frequency | 50 Hz |
| Base Frame Type | EMCP 4.1 | Engine Speed | 1500 RPM |
| Circuit Breaker Type | Heavy Duty Fabricated Steel | Fuel Tank Capacity | 219 I/hr / 57.9 gal/hr |
| Circuit Breaker Type | 3 Pole MCB / 3 Pole MCCB | Fuel Consumption – Prime | 16.6 I/hr / 4.4 gal/hr |
| Fuel Consumption – Standby | 18.3 I/hr / 4.8 gal/hr | ||
Physical Data of CAT DE65E3 Diesel Generator Set |
|||
| Manufacturer | Caterpillar | Engine Model | C4.4 |
| No. of Cylinders/Alignment | 4 / In Line | Cycle | 4 Stroke |
| Induction | Naturally Aspirated | Cooling Method | Water |
| Governing Type | Mechanical | Governing Class | ISO 8528 G2 |
| Compression Ratio | 18.23:1 | Displacement | 4.4 l / 268.5 cu.in |
| Bore | 105.0 mm / 4.1 in | Stroke | 127.0 mm / 15.0 in |
| Moment of Inertia | 1.14 kg.m² / 3896 lb.in² | No. of Bearings | 1 |
| Dry Weight | 401 kg / 884 lb | Wet Weight | 408 kg / 899 lb |
| Engine Electrical System-Voltage/Ground | 12 / Negative | Engine Electrical System-Battery Charger Amps: | 65 |
| Insulation Class | H | Ingress Protection Rating | lP23 |
| Winding Pitch – Code | 2 / 3 – MO | Excitation System | SHUNT |
| Wires | 12 | AVR Model | Mark V |
Operating Data of CAT DE65E3 Diesel Generator Set |
|||
| Overspeed | 2250 RPM | Total Harmonic Content LL/LN | 2.00% |
| Voltage Regulation: (steady state) | +/- 1.0% | Wave Form IEC = THF | 2.00% |
| Wave Form NEMA = TIF | 50 | Radiant Heat | 6.0 kW / 341 Btu/min |
| Radio Interference | Suppression Is In line With European Standard EN61000-6 | ||
| ——END—— | |||
System Data of CAT DE65E3 Diesel Generator Set |
||||
| Air System | Air Filter Type | Replaceable Element | Max. Combustion Air Intake Restriction | 6.0 kPa / 24.1 in H2O |
| Combustion Air Flow – Standby | 4.9 m³/min / 173 cfm | Radiator Cooling Air Flow | 84.0 m³/min / 2966 cfm | |
| Combustion Air Flow – Prime | 4.7 m³/min / 166 cfm | External Restriction To Cooling Air Flow | 125 Pa / 0.5 in H2O | |
| Cooling System | Cooling System Capacity | 16.5 l / 4.4 gal | Heat Rejected To Water & Lube Oil – Standby | 46.8 kW / 2661 Btu/min |
| Water Pump Type | Centrifugal | Heat Rejected To Water & Lube Oil – Prime | 47.0 kW / 2673 Btu/min | |
| Heat Radiation to Room-Standby | 15.3 kW / 870 Btu/min | Radiator Fan Load | 1.0 kW / 1.3 hp | |
| Heat Radiation to Room-Prime | 14.3 kW / 813 Btu/min | |||
| Lubrication System | Oil Filter Type | Spin-On, Full Flow | Oil Type | API CH4 15W-40 |
| Total Oil Capacity | 8.0 l / 2.1 gal | Cooling Method | Water | |
| Oil Pan | 7.0 l / 1.8 gal | |||
| Fuel System | Fuel Filter Type | Replaceable Element | Recommended Fuel | Class A2 Diesel or BSEN590 |
| Fuel Consumption Prime – 110% Load | 18.3 l/hr / 4.8 gal/hr | Fuel Consumption Standby – 110% Load | N/A | |
| Fuel Consumption Prime – 100% Load | 16.6 l/hr / 4.4 gal/hr | Fuel Consumption Standby – 100% Load | 18.3 l/hr / 4.8 gal/hr | |
| Fuel Consumption Prime – 75% Load | 12.1 l/hr / 3.2 gal/hr | Fuel Consumption Standby – 75% Load | 13.1 l/hr / 3.5 gal/hr | |
| Fuel Consumption Prime – 0% Load | 8.1 l/hr / 2.1 gal/hr | Fuel Consumption Standby – 50% Load | 8.7 l/hr / 2.3 gal/hr | |
| Exhaust System | Silencer Type: | Industrial | Max. Allowable Back Pressure | 12.0 kPa / 3.5 in.Hg |
| Silencer Model & Quantity | EXSY1 (1) | Exhaust Gas Flow – Prime | 11.2 m³/min / 396 cfm | |
| Silencer Noise Reduction Level | 19 dB | Exhaust Gas Temperature – Standby | 627 °C / 1161 °F | |
| Exhaust Gas Temperature – Prime | 570 °C / 1058 °F | Pressure Drop Across Silencer System | 3.30 kPa / 0.974 in.Hg | |
| Exhaust Gas Flow – Standby | 12.3 m³/min / 435 cfm | |||
| ——END—— | ||||
Capacities of CAT DE65E3 Diesel Generator Set |
|||
| Voltage | 415 / 240 V | 400 / 230 V | 380 / 220 V |
| Prime – kVA / kW | 60.0 / 48.0 | 60.0 / 48.0 | 60.0 / 48.0 |
| Standby – kVA / kW | 65.0 / 52.0 | 65.0 / 52.0 | 65.0 / 52.0 |
| Motor Starting Capability – kVA | 74 | 74 | 62 |
| Short Circuit Capacity – % | 300 | 300 | 300 |
| Reactances Per Unit – Xd | 3.22 | 3.46 | 3.83 |
| Reactances Per Unit- X’d | 0.28 | 0.30 | 0.33 |
| Reactances Per Unit- X”d | 0.112 | 0.121 | 0.134 |
| ——END—— | |||
Ratings Definitions of CAT DE65E3 Diesel Generator Sets |
|||
| Standby | Output available with varying load for the duration of the interruption of the normal source power. Average power outputis 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year. | Prime | Output available with varying load for an unlimited time. Average power output is 70% of the prime power rating. Typical peak demand is 100% of prime rated ekW with 10% overload capability for emergency use for a maximum of 1 hour in 12. Overload operation cannot exceed 25 hours per year. |
| Fuel Rates | Fuel rates are based on fuel oil of 35º API [16°C (60ºF)] gravity having an LHV of 42,780 kJ/kg (18,390 Btu/lb) when used at 29ºC (85ºF) and weighing 838.9 g/liter (7.001 lbs/U.S. gal.) | Applicable Codes and Standards | AS 1359, CSA C22.2 No. 100-04, UL 142, UL 489,UL 869, UL 2200, NFPA 37, NFPA 70, NFPA 99, NFPA 110, IBC, IEC 60034-1, ISO 3046, ISO 8528, NEMA MG1-22, NEMA MG1-33, 2014/35/EU, 2006/42/EC, 2014/30/EU. |
| Data Center Applications | 1. ISO 8528-1 Data Center Power (DCP) compliant per DCP application of Cat diesel generator set prime power rating. | ||
| 2. All ratings Tier III/Tier IV compliant per Uptime Institute requirements. | |||
| 3. All ratings ANSI/TIA-942 compliant for Rated-1 through Rated-4 data centers. | |||
| ——END—— | |||
Optional Equipment of CAT DE65E3 Diesel Generator Set |
|||||
| Engine | Air Cleaner | Power Termination | Type | Alternator | Output Voltage |
| 1. Single Element | 1. Bus Bar | 1. 380 V | |||
| 2. Dual Element | 2. Circuit Breaker | 2. 400 V | |||
| 3. Heavy Duty | 3. 1250 A | 3. 415 V | |||
| Muffler | 4. 1600 A | Temperature Rise(Over 40°C Ambient) | |||
| 1. Industrial Grade (10 Db) | 5. 2500 A | 1. 125 °C | |||
| Starting | 6. 3-Pole | 2. 105 °C | |||
| 1. Standard Batteries | 7. Iec | 3. 3.08 °C | |||
| 2. Oversized Batteries | 8. Manually Operated | Winding Type | |||
| 3. Heavy Duty Electric Starter(S) | 9. Electrically Operated | 1. Random Wound | |||
| 4. Dual Electric Starter(S) | Trip Unit | Excitation | |||
| 5. Jacket Water Heater | 1. Lsi | 1. Self Excited | |||
| 6. N/A | 2. N/A | 2. Permanent Magnet (Pm) | |||
| Control System | Controller | Extended Service Options | Terms | Ancillary Equipment | 1. Automatic Transfer Switch |
| 1. Emcp 4.2B | 1. 2 Year (Prime) | 2. Uninterruptible Power Supply | |||
| 2. Emcp 4.3 | 2. 3 Year | 3. Paralleling Switchgear | |||
| 3. Emcp 4.4 | 3. 5 Year | 4. Paralleling Controls | |||
| Attachments | 4. 10 Year | Connectivity | |||
| 1. Local Annunciator Module | Coverage | 1. Ethernet | |||
| 2. Remote Annunciator Module | 1. Silver | 2. Cellular | |||
| 3. Expansion I/O Module | 2. Gold | 3. Satellite | |||
| 4. Remote Monitoring Software | 3. Platinum | 4. N/A | |||
| 5. N/A | 4. Platinum Plus | 5. N/A | |||
| Fuel Tank | 1. 317 Gal (1200 L) | Charging | 1. Battery Charger – 5A | Certifications | 1. Eurasian Conformity (EAC) |
| ——END—— | |||||
Standard Features of CAT DE65E3 Diesel Generator Sets |
|||
| Cat Diesel Engine | 1. Designed and optimized for low fuel consumption | Alternators | 1. Superior motor starting capability minimizes need for oversizing generator |
| 2. Reliable performance proven in thousands of applications worldwide | 2. Designed to match performance and output characteristics of Cat diesel engines | ||
| Generator Set Package | 1. Accepts 100% block load in one step and meets NFPA 110 loading requirements | EMCP 4 Control Panels | 1. User-friendly interface and navigation |
| 2. Conforms to ISO 8528-5 G3 load acceptance requirements | 2. Scalable system to meet a wide range of installation requirements | ||
| 3. Reliability verified through torsional vibration, fuel consumption, oil consumption, transient,performance, and endurance testing | 3. Expansion modules and site specific programming for specific customer requirements | ||
| Cooling System | 1. Cooling systems available to operate in ambient temperatures up to 50°C (122°F) | Worldwide Product Support | 1. Cat dealers have over 1,800 dealer branch stores operating in 200 countries |
| 2. Tested to ensure proper generator set cooling | 2. Your local Cat dealer provides extensivepost-sale support, including maintenance and repair agreements | ||
| Warranty | 1. 24 months/1000-hour warranty for standby and mission critical ratings | Financing | 1. Caterpillar offers an array of financial products to help you succeed through financial service excel46548lence |
| 2. 12 months/unlimited hour warranty for prime and continuous ratings | 2. Options include loans, finance lease,operating lease, working capital, and revolving line of credit | ||
| 3. Extended service protection is available to provide extended coverage options | 3. Contact your local Cat dealer for availability in your region | ||
| ——END—— | |||
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
![](/wp-content/uploads/2021/08/WhatApp-Icon.png"){kind=icon}
