Caterpillar C32 Diesel Generator Set
CAT C32 Diesel Generator Set is a V-4-Cylinders 32.1 Liter (1959 in) Displacement Engine with 145 mm (5.7 in.) Bore and 162.0 mm (6.4 in.) Stroke.
Equipped with Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with Electronic Unit Injector Fuel System Rigid Wiring Harness and ADEM™ A5 Governor.The Prime Power for 60 Hz Generator Set (1800 RPM) of CAT C32 Diesel Generator Sets is 220 to 4160 Volts and a Maximum Rating of 1250.0 ekw, a Minimum Rating of 830.0 ekw.
CAT C32 Diesel Genset Powered by CAT Diesel Engine with EMCP 4 Control Panel, Diesel Genset with Turbocharged & Air-Air Intercooler.
CAT Diesel Generator Sets Meet Tier III/Tier IV Emission Standards. As Part of EMAC, CAT Diesel Generator Sets Also Provide 50 Hz and 60 Hz Diesel Generator Sets. Engine Brands Include Cummins, Deutz, Perkins, MTU, WeiChai and CAT.
Our Diesel Generator Set Series Includes High Power Medium and High Voltage Generator Sets and High Power Low Voltage Generator Sets. The Engine Provides Electronically Controlled and Mechanical Fuel Injection Systems for Customers to Choose. In Addition to Generating Diesel Generator Sets, We Can Also Supply Marine Diesel, Oil, Gas, Marine Generator Sets.
We Provide Full Life Cycle Services for All Customers, From Design to Power System Supply, From Installation to Commissioning, From After-Sales Service Training to Spare Parts Supply, From Troubleshooting to Overhaul Technical Support.
Advantages of Caterpillar C32 Diesel GenSet
-
It is synchronized with Cummins’ advanced design and sophisticated manufacturing, adapts to harsh working conditions, and has high-intensity and heavy-duty work capabilities.
-
The Holset wastegate valve makes the low speed performance more perfect and the power performance better.
-
The cylinder block and cylinder head adopt integrated design to prevent the occurrence of engine water and oil leakage. The parts are 40% less than other similar engines, and the failure rate is greatly reduced.
-
Using forged steel camshaft and crankshaft, high-strength cylinder design, many parts are cast on the cylinder, with high rigidity, high pressure resistance, good reliability and longer service life.
-
The cylinder liner adopts a platform mesh honing design, which effectively prevents oil leakage with a perfect geometric structure, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.
-
Holset supercharger with integrated wastegate valve, low speed response and strong power.
Technical Specifications
Basic Introduction of CAT C32 Diesel Generator Set
Engine Model: | C32 |
Engine Type: | N/A |
Displacement: | 32.1 L |
Rated Speed: | 1800 RPM |
Aspiration Method: | Turbocharged & Air – Air Intercooler |
Emission Standard: | N/A |
Bore*Storke: | 145 mm * 162 mm |
Packing Size(L*W*H): | 4165 mm * 2228 mm * 2194 mm |
Wet Weight: | 7600 Kg |
Lead Time: | 15-30 Working Days |
Payment Terms: | T/T ,L/C |
Engine Model |
Minimum Rating |
Maximum Rating |
Aspiration |
Fuel System |
C32 | 830 Ekw | 1250 Ekw | Turbocharged & Water-Air Intercooler | MEUI |
——END—— |
General Information of CAT C32 Diesel Generator Set |
|||
Engine Model | C32 | Displacement | 32.1 I |
Minimum Rating | 830 ekW | Governor Type | Adem™A4 |
Maximum Rating | 1250 ekW | Length – Minimum | 4165 mm |
Emissions/Fuel Strategy | Low Fuel,Tier 2 Nonroad Stds | Length – Maximum | 4385 mm |
Voltage | 220 to 4160 Volts | Width – Minimum | 1684 mm |
Frequency | 60 Hz | Width – Maximum | 2228 mm |
Speed | 1800 rpm | Height – Minimum | 2162 mm |
Duty cycle | Standby, Mission Critica l,Prime,Continuous | Height – Maximum | 2194 mm |
Engine Model | C32 TA, V-12, 4-Stroke Water-Cooled Diesel | Dry Weight – Genset (minimum) | 6668 kg |
Bore | 145 mm | Dry Weight – Genset (maximum) | 7600 kg |
Stroke | 162 mm | compression Rati | 15.0:1 |
Aspiration | TA | Fuel System | MEUI |
——END—— |
Standard Equipment of CAT C32 Diesel Generator Set |
|||||
General | 1. Rh Service | Starting And Charging | 1. 45 Amp Charging Alternator | Fuelsystem | 1. Fuel Cooler |
2. Sae Standard Rotation | 2. 24 Volt Electric Starting Motor | 2. Fuel Priming Pump | |||
3. Flywheel And Flywheel Housing-Sae | 3. Battery Disconnect Switch | 3. Secondary Fuel Filter | |||
4. Caterpillar Yellow With High Gloss Black Rails & Radiator | 4. Battery, Rack And Cables | 4. Primary Fuel Filter With Water Separator | |||
Cooling System | 1. Ataac | Lube System | 1. Gear Type Lube Oil Pump | Control Panel | 1. Warning Shutdowns |
2. Caterpillar Extended Life Coolant | 2. Oil Drain Lines And Valve | 2. EMCP 4.2B | |||
3. Coolant Drain Line With Valve | 3. Fumes Disposal | 3. Digital lndicators | |||
4. Low Coolant Level Sensor | 4. Lubricating Oil | 4. communications | |||
5. Fan And Belt Guards | 5. Lntegral Lube Oil Cooler | 5. Control Features | |||
6. Radiator Fan And Fan Drive | 6. Oil Filter, Filler And Dipstick | 6. Programmable Protective Relaying Functions | |||
Exhaust System | 1. Exhaust Manifold – Dry | Mounting System | 1. Rubber Anti-Vibration Mounts | Governing System | 1. Adem(Tm)A4 |
2. 203 Mm(8 In)Id Round Flanged Outlet | 2. Rails – Engine Generator / Radiator Mounting | 2. N/A | |||
Generators And Attachments | 1. Reactive Droop | Generators And Attachments | 7. 6 Lead | Air Inlet System | 1. Single Element Canister Type With Service Indicator |
2. 3 Phase Brushless | 8. Salient Pole | 2. N/A | |||
3. Permanent Magnet | 9. Lnternal Excitation | 3. N/A | |||
4. Winding Temperature Detectors | 10. Iec Standard Hole Pattern | ||||
5. Lntegrated Voltage Regulator(Ivr) | 11. Nema Class H Insulation | ||||
6. Class H Temperature Rise At 40C Ambient | 12. Busbar Connections, Top Center Mounted, Top Cable Entry | ||||
——END—— |
Optional Equipment of CAT C32 Diesel Generator Set |
|||||
Air Inlet System | 1. Standard Air Cleaner | Lube Svstem | 1. Oil Level Regulator | Power Connections | 1. Center Post Busbar |
2. Heavy Duty Air Cleaner | 2. Oil Pan | 2. Low Voltage Connection Cables | |||
3. Dual Element Air Cleaner | 3. Prelube Manual Sump Pump | 3. Neutral Grounding Connection | |||
Cunirul Panels | 1. Emcp 4.3,Emcp 4.4 | General | 1. Us Aid Emblem | Power Termination | 1. Circuit Breakers, Ul Listed |
2. N/A | 2. Special Paint | 2. Circuit Breakers, Iec Compliant | |||
Cooling System | 1. High Ambient Radiator | Mounting System | 1. Spring Type Vibration Isolators | Generator And Attachments | 1. Medium Voltage Optional Generators |
2. Extended Life Coolant | 2. Ibc Vibration Isolator | 2. Low Voltage Optional Generators | |||
3. Standard Radiator | 3. Mounting Base Types | 3. N/A | |||
4. Radiator Duct Flange | 4. Standard Package Isolators | 4. N/A | |||
5. Certified Radiator | 5. N/A | ||||
Mounting System | 1. Spring Type Vibration Isolators | Starting / Charging | 1. Space Heater | Exhaust System | 1. Flanges |
2. Ibc Vibration Isolator | 2. Jacket Water Heater | 2. Mufflers | |||
3. Mounting Base Types | 3. 35 Amp Battery Charger | 3. Flexible Fittings | |||
4. Standard Package Isolators | 4. 20 Amp Battery Charger | 4. Elbow Mounting Kit | |||
5. N/A | 5. Heavy-Duty Starting System | 5. Guard And Shield System | |||
6. N/A | 6. 10 Amp Battery Charger | 6. Exhaust Through Wall Kit | |||
7. N/A | 7. 10 Amp Enclosure Battery Charger | 7. Flange And Exhaust Expanders | |||
8. Electric Starting Motor – Standard / Heavy Duty | 8. All C32 Engines Have 203 Mm (8 In) Exhaust Outlets | ||||
Enclosures | 1. Panel Bracket | Special Tests / Reports | 1. Standard Engine Test | Circuit Breakers | 1. Shrouds |
2. Cold Weather Bundle | 2. Lbc Seismic Certifications | 2. Cable Supports | |||
3. Color Options | 3. Pgs Test Report 1.0 Power Factor | 3. Power Connection Covers | |||
4. Dc Lighting Package | 4. Custom Genset Tva Report | 4. Circuit Breaker Wiring Groups | |||
5. Sound Attenuated Enclosure | 5. Generator Test Report | 5. Center Posts Busbars | |||
6. Ac Panel, Outlets And Lights | 6. Oshpd Seismic Certifications | 6. Enclosures – Control Packaging | |||
7. Premium Sound Attenuated Enclosure | 7. Pgs Test Report 0.8 Power Factor | 7. 1600,2000,2500 And 3200 Amp, 3 Pole, Lec-Rated Circuit Breakers | |||
8. Enclosure Fuel Tank Options | 8. Csa Test And Certification | 8. 400,800,1200,1600,2000, 2500 And 3000 Amp, 3 Pole, Ul-100% Rated Circuit Breakers | |||
9. Enclosure Louvers – Fixed And Motorized | 9. Standard Genset Torsional Vibration Analysis (Tva) Report | 9. 800,1600,2000,2500 And 3200 Amp,4 Pole, Lec-Rated Circuit Breakers | |||
——END—— |